Internetwork Expert WB VOL 1 - BGP Lab 2

2)BGP Update Source Mismatch

Objective: Configure a BGP peering relationship between R1 and R3. R1 should peer with R3's Ethernet interface, while R3 should peer with R1's Serial interface.

Yep yep, I did this lab and it did take not more than 10 minutes! I know too much time there ..an ip on the fa 0/0 of R1 cuased me some problem, but nothing major. I need to be a bit more attentive whilst doing these labs I guess.

Anyways configuration was correct, I did it w/o any problems ..infact I went ahead and used the neighbor 13.0.0.3 update-source serial 1/1 command, which actually fixed and made the bgp peering come-up successfully.